It is frightening to have your furnace stop working in the winter. The most common problem with furnaces is that people don’t think about them until they stop working. Which can cause trouble at any point during the winters.  

The furnace is generally quite reliable. However, it can break down. Maintaining your furnace properly helps prevent breakdowns.

What could be causing my furnace not to turn on?

The reason your furnace does not start after you turn your heat on could be due to a variety of reasons:

Check the thermostat

Your furnace is not turning on due to a malfunctioning thermostat. Check that the thermostat is set to the heating setting first. 

The next step is to ensure the thermostat setting is lower than your home’s temperature. If your thermostat has an internal problem, a professional will need to fix it.

Defused fuse

In the case of blown fuses, your furnace will not work. Ensure that your circuit breakers are working and that the switch for your furnace is in the “on” position.

Blown out pilot light

Ensure the flame is burning on an older furnace using a gas pilot light. A blown pilot light will prevent your furnace from properly igniting. Relight the pilot light of your furnace according to the manufacturer’s instructions.

Turned off the gas valve

Perhaps your gas valve to your furnace was shut off during the summer for safety reasons. If you want your furnace to receive the gas, make sure the gas switch is turned to the “on” position.

Contaminated air filter

You may experience furnace shutdowns due to a dirty air filter. Your furnace can develop all sorts of problems when its air filter is dirty. You should make sure that your filter is clean so that your furnace will start up again. 

Overheating or faulty parts

It is possible for any furnace component to malfunction or overheat, causing the system to turn off as a result. Expert furnace repair Newark services should be contacted if any parts of the furnace fail.

How do I know if my furnaces is not working right?

Given below are a few of the most common signs that indicate a furnace that isn’t working right and needs to be repaired:

  • Bill raised: You could be experiencing this problem due to decreased efficiency.
  • Noisy sounds: Your furnace might be experiencing electrical problems if it is buzzing or humming.
  • Strange smell: A gas leak or a malfunctioning furnace may cause odors.

A malfunctioning furnace can be very uncomfortable, especially when cold outside. Asking a professional what might be wrong and when to call them can help speed up the process of repairing it.

Inspecting your system periodically can prevent minor issues from becoming major ones, helping you save money and remain comfortable at the same time.

If you want to know why your furnace isn’t working and cannot identify the underlying issue or if you’d like to have a heater installation Newark in your home, contact Ronjon Heating and Cooling Inc.